HONEYWELL-HOME-PROSERIES-PROSIXC2W-SiXC2WA-ENCRYPTED-WIRED-To-WIRELESS-CONVERTER-01-xeu

HONEYWELL HOME PROSERIES PROSIXC2W SiXC2WA ENCRYPTED WIRED To WIRELESS CONVERTER

HONEYWELL HOME PROSERIES PROSIXC2W SiXC2WA ENCRYPTED WIRED To WIRELESS CONVERTER
HONEYWELL HOME PROSERIES PROSIXC2W SiXC2WA ENCRYPTED WIRED To WIRELESS CONVERTER
HONEYWELL HOME PROSERIES PROSIXC2W SiXC2WA ENCRYPTED WIRED To WIRELESS CONVERTER
HONEYWELL HOME PROSERIES PROSIXC2W SiXC2WA ENCRYPTED WIRED To WIRELESS CONVERTER
HONEYWELL HOME PROSERIES PROSIXC2W SiXC2WA ENCRYPTED WIRED To WIRELESS CONVERTER
HONEYWELL HOME PROSERIES PROSIXC2W SiXC2WA ENCRYPTED WIRED To WIRELESS CONVERTER

HONEYWELL HOME PROSERIES PROSIXC2W SiXC2WA ENCRYPTED WIRED To WIRELESS CONVERTER
Increased Security, Easy Installation. The PROSIXC2W/SIXC2WA Converter from Resideo enables retrofitting existing 12V security systems by converting their wired sensors to SiXT Wireless Technology. It can also be used in new construction installations fitted with hardwired systems. Since there is no need to replace wired devices with individual transmitters, you save on installation costs time and materials. 1 x Hardwired to Wireless Converter – NIB. 1 x AC Power Supply. Resistors are included also. This item is in the category “Home & Garden\Home Improvement\Home Security\Security Keypads”. The seller is “daynelbian” and is located in this country: US. This item can be shipped worldwide.
  • Model: Hardwired to Wireless Converter
  • Battery Included: No
  • Compatible Brand: Lyric, ADT Command, ProSeries, Resideo, Honeywell
  • Power Source: Battery, Hardwired, Wall Plug-In
  • Connectivity: Wireless
  • Type: WIRED TO WIRELESS CONVERTER
  • Features: Battery Backup
  • MPN: PROSIXC2W, SIXC2WA
  • UPC: 194160000106
  • Brand: HONEYWELL/RESIDEO
  • Number of Cameras Included: 0

HONEYWELL HOME PROSERIES PROSIXC2W SiXC2WA ENCRYPTED WIRED To WIRELESS CONVERTER
Qolsys-QS-8130-P01-IQ-345-TO-319-5-Wired-To-Wireless-Converter-Qty2-01-bjn

Qolsys QS-8130-P01 IQ (345 TO 319.5) Wired To Wireless Converter (Qty2)

Qolsys QS-8130-P01 IQ (345 TO 319.5) Wired To Wireless Converter (Qty2)
Qolsys QS-8130-P01 IQ (345 TO 319.5) Wired To Wireless Converter (Qty2)
Qolsys QS-8130-P01 IQ (345 TO 319.5) Wired To Wireless Converter (Qty2)

Qolsys QS-8130-P01 IQ (345 TO 319.5) Wired To Wireless Converter (Qty2)
QOLSYS QS-8130-PO1 IQ TRANSLATOR (OPENED BOX). QS-8130-P01 (345 TO 319.5). Opened to inspect contents, part of surplus lot. The IQ Wireless Translator interprets the signals sent from non-native security frequencies into a signal the IQ panel can understand. The Qolsys IQ Wireless Translator receives wireless signals from 2GIG or Honeywell sensors using 345 MHz and converts the frequency to 319.5 MHz. This will allow you to pair your existing 2GIG or Honeywell wireless sensors that transmit in 345 MHz with the Qolsys IQ Panel or other compatible control panel/receiver (319.5 MHz wireless frequency), such as a GE/Interlogix Panel NetworX, Simon, etc. It can enroll up to 63 devices, has backup battery operation (72 hours), and features two antennas for Dual Diversity Receive and Dual Diversity Transmit for improved wireless performance. Converts up to 63 Honeywell/2GIG wireless sensors from 345 MHz to 319.5 MHz. Works with Qolsys IQ or GE/Interlogix panels. Works within 100 feet of control panels. This item is in the category “Home & Garden\Home Improvement\Home Security\Remotes & Wireless Transmitters”. The seller is “amax0054″ and is located in this country: US. This item can be shipped to United States.
  • Compatible Brand: ADT, Honeywell, Ring
  • Smart Home Compatibility: Amazon Alexa, Google Assistant, Samsung SmartThings
  • Type: Alarm System Module
  • Smart Home Protocol: Infrared, Wi-Fi, Z-Wave
  • Color: White
  • MPN: QS-8130-PO1
  • Brand: Qolsys

Qolsys QS-8130-P01 IQ (345 TO 319.5) Wired To Wireless Converter (Qty2)
Honeywell-5800C2W-Hardwired-to-5800-Wireless-Converter-NIB-01-mvkm

Honeywell 5800C2W Hardwired to 5800 Wireless Converter (NIB)

Honeywell 5800C2W Hardwired to 5800 Wireless Converter (NIB)
Honeywell 5800C2W Hardwired to 5800 Wireless Converter (NIB)

Honeywell 5800C2W Hardwired to 5800 Wireless Converter (NIB)
Honeywell 5800C2W Hardwired to 5800 Wireless Converter (NIB) LOT OF 2. Nine hardwired zones with end-of-line resistor protection – use with existing contacts, PIRs, glassbreaks and other 12V sensors – Not for use with fire or heat sensors – It is recommended that any existing smoke, heat or CO detectors be replaced with new Honeywell Home 5800 Series detectors. One-button calibration/activation of zone inputs. 5800C2W wireless zones enroll in the control panel like any other 5800 Series device. 5800 Series serial numbers automatically assigned to activated zones. Power supply included to power PIRs – 12V 4AH battery provides four hours of standby – Low battery supervision and notification. Complete supervision of transmitters, zone tampers, low battery. Module can be mounted next to the control panel being replaced, or relocated if necessary to maximize wireless range. Track Page Views With. Auctiva’s FREE Counter. This item is in the category “Home & Garden\Home Improvement\Home Security\Remotes & Wireless Transmitters”. The seller is “amax0054″ and is located in this country: US. This item can be shipped worldwide.
  • MPN: 5800C2W
  • Smart Home Compatibility: Amazon Alexa
  • Model: 5800
  • Compatible Brand: ADT, Honeywell
  • Brand: Honeywell
  • Color: White
  • Smart Home Protocol: Infrared, Wi-Fi, Z-Wave
  • Type: Transmitter

Honeywell 5800C2W Hardwired to 5800 Wireless Converter (NIB)
Qolsys-QS7134-840-IQ-Hardwired-16-F-Wired-To-Wireless-Converter-Large-enclosure-01-oom

Qolsys QS7134-840 IQ Hardwired 16-F Wired To Wireless Converter Large enclosure

Qolsys QS7134-840 IQ Hardwired 16-F Wired To Wireless Converter Large enclosure
Qolsys QS7134-840 IQ Hardwired 16-F Wired To Wireless Converter Large enclosure

Qolsys QS7134-840 IQ Hardwired 16-F Wired To Wireless Converter Large enclosure
Welcome to Designer Entryway. Musical Instruments & Gear. Cell Phones & Accessories. Qolsys QS7134-840 IQ Hardwired 16-F Wired To Wireless Converter Large enclosure. IQ Hardwire 16-F (Large Enclosure). The Qolsys QS7134-840 IQ HARDWIRE 16-F Wired To Wireless Converter (Large Enclosure) offers a cost effective way of integrating hardwired security & smoke detector zones with the IQ Panel 2. It includes a large enclosure with ample wire routing room, backup battery charging, 500mA of 12 volt auxiliary power, an onboard siren relay, built-in status LEDs for each zone and support for up to 10 two-wire smoke detectors. Normally Open and Normally Closed contacts are supported as well as powered zones like motion sensors and glass break detectors. Large plastic enclosure with ample wiring room, backup battery holder, and an expansion slot for second module Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems Supports up to ten two wire smoke detectors LED lighted zones for ease of learn-in installation/troubleshooting EOL supervision using 4.7K Ohm resistors (included) or 1k-10k Ohm depending on Resistor Mode Up to 500 Milliamps of power for hardwired motion detectors, glass break detector, and/or sirens Charging circuit for back-up battery, fully supervised with power outage recovery. Input Voltage: 16.0VDC Plug-In Transformer Backup Battery: 12VDC 5AH Max (not included) Dimensions: 16 X 14 X 3 Operating Temperature: 32 to 122F (0 to 50C) Humidity: 95% RH Max EOL Supervision: 4.7k Ohm fixed or 1k-10k Ohm depending on Resistor Mode Input Zones: 15 N/O or N/C Smoke Zone: 1 two-wire smoke loop, 10 detectors max. All Products has to be in Original Packaging, not used, all seals intact and in a perfect condition. E, reason for the return. However, failure to submit any item could impact the eligibility for credit. Upon receipt Designer Entryway, LLC. Will assess the condition of the product and will determine if a defect exist in the material/product and will be result for final judgment to determine the final credit. All Electronic items are to be inspected, in working conditions also they are subject to be inspected for matching Serial numbers from our records. And our Customer Service team will be happy to assist. Join Our Exclusive Newsletter For Up To Date News, Special Offers And New Arrivals. Get in touch with us. Designer Entryway LLC Kissimmee, Florida Postal Code 34745 United States. Listing and template services provided by inkFrog. The item “Qolsys QS7134-840 IQ Hardwired 16-F Wired To Wireless Converter Large enclosure” is in sale since Tuesday, December 29, 2020. This item is in the category “Home & Garden\Home Improvement\Home Security\Remotes & Wireless Transmitters”. The seller is “designerentrywayllc” and is located in Kissimmee, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Croatia, Brazil, Chile, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Brand: Qolsys
  • Color: White
  • Compatible Brand: ADT
  • Model: QS7134-840
  • MPN: QS7134-840
  • Smart Home Compatibility: N/A
  • Smart Home Protocol: RFI
  • Type: Transmitter
  • UPC: 857497008435

Qolsys QS7134-840 IQ Hardwired 16-F Wired To Wireless Converter Large enclosure

Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt

Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt
Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt
Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt
Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt
Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt
Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt

Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt
Item is new and has been tested, for complete function. All accessories including hardware and software included. This devise allows the use of analog video cameras to be tied into your ADT pulse alarm system. NV412A is the analog to digital converter required if you want to use an analog camera on your ADT Pulse system. If you connect this to the analog camera it makes it viewable on your ADT Pulse login. The NV412A needs to be connected via ethernet to the iHub. Since the iHub only has one devices port, you will need to add the ADT Pulse Switch if you want to have more than one of these connect at a time. There are two scenarios that you would want to use this NV412A. The first is if you have an analog camera system already and just want to be able to view 1-10 of the existing cameras on your new ADT Pulse system. This is easy because all you need is the NV412A. One for each camera. Your cameras are already installed, wired, and powered. So just install the NV412A before the DVR. Unplug the BNC cable from the DVR and plug it into the NV412A and then plug a new BNC cable from the NV412A output to the DVR input. The second scenario is where there is no existing camera and we want to install a new analog camera. This requires you to run the pre-made siamese cable where you want it the camera installed first. Then mount the camera where you want it. After the wire is ran the next step is to connect the wires and then power it up. The coax cable is the video cable that needs to be connected via bnc connector to the NV412A. The power side of the cable needs to be connected to a power supply and then plugged into power. Then your analog camera should be able to be seen from your ADT Pulse portal once you learn in the NV412A. International buyers I choose the best packaging and provide actual packing sizes and weights in all my listings. Thank you for viewing my items. The item “OEM SENSORMATIC NETWORK VIDEO SERVER CONVERTER ADT PULSE NV412AADT NV412A ADT” is in sale since Monday, January 30, 2017. This item is in the category “Home & Garden\Home Improvement\Home Security\Security Systems”. The seller is “cuban_king” and is located in Flushing, New York. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, CL, CO, CR, DO, PA, TT, GT, SV, HN, JM.
  • Brand: Sensormatic
  • Model: NV412A ADT
  • MPN: NV412A
  • Country/Region of Manufacture: China

Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt