Posted on April 24, 2025 hikvision

Hikvision 8K NVR 32CH 16 PoE 32MP DS-7732NI-M4/16p 4SATA (UP TO 40TB HDD) H. 265+

HIKVISION DS-7732 NI-M4/16P 32 MEGAPIXEL 16 PoE PLUG & PLAY 4K NVR. (UL) LISTED AUTHORIZED TO USED AND DISTRIBUTION ON USA. DS-7732NI-M4/16P 32MP 32-ch 1.5U 16 PoE 8K NVR ULTRA SERIES. Up to 32-ch IP camera inputs. Up to 320 Mbps incoming bandwidth. Up to 32 MP resolution. After ultra HD resolution mode is enabled, the NVR supports up to 8-ch 32 MP/24 MP IP video inputs. 8K (7680 × 4320)/30Hz, 4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz. 4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz. When HDMI 1 output resolution is 8K, the maximum HDMI 2 output resolution is 1080p. HDMI1/VGA simultaneous output, HDMI2/VGA independent output. 1-ch, BNC (1.0 Vp-p, 75?), resolution: PAL: 704 × 576, NTSC: 704 × 480. 1-ch, RCA (Linear, 1 K?). 1-ch, RCA (2.0 Vp-p, 1 K? , using the audio input). 32 MP/24 MP/12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA /4CIF/DCIF/ 2CIF/CIF/QCIF. Video, Video & Audio. TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnPT, HTTP, HTTPS. 1, RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface. 16, RJ-45 10/100 Mbps self-adaptive Ethernet interface. IEEE 802.3 af/at. Up to 16 TB capacity for each HDD. 2 RS-485 (half-duplex), 1 RS-232. Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0. Controllable 12 VDC, 1 A power output for external alarm device; The power will be turned on when the alarm output is triggered. The Ctrl 12V power is controlled by alarm output 9. 12 VDC, 1 A power output. 100 to 240 VAC, 50 to 60 Hz. 15 W (without HDD and PoE off). 10 °C to 55 °C (14 °F to 131 °F). 19-inch rack-mounted 1.5U chassis. Dimension (W × D × H). 445 × 400 × 75 mm (17.5″× 15.7″ × 3.0). 5 kg without HDD, 11 lb. Part 15 Subpart B, ANSI C63.4-2014. EN 55032:2015+A1:2020, ENIEC61000-3-2:2019+A1:2021, EN 61000-3-3:2013+A1:201. 9, EN 50130-4:2011+A1:2014, EN 55035:2017+A11:2020.

Posted on April 23, 2025 rsrteng

Rsrteng 7 8K IP Camera Tester 4K CCTV Tester AHD CVI TVI SDI VGA HDMI TDR OPM

Rsrteng 7 8K IP Camera Tester 4K CCTV Tester AHD CVI TVI SDI VGA HDMI TDR OPM. This listing we will. 7 inch IPS touch screen, 1280800 resolution. 1 channel BNC input, NTSC/PAL (Auto adapt). Main stream test (hardware decoding). Main stream supports up to 8K 32MP 8160×3616 24fps resolution. Main stream supports up to 4K 12MP 4000×3000/3840×2160 30fps resolution. Network & IP camera test. DC12V/POE 48V power supply and power detection, network information, IP address search, image display etc. For Onvif camera, auto log in to view video, modify IP, modify channel names, support face recognition and create test reports. Support more than 80 brands proprietary Protocol Camera such as AXIS, ACTi, Dahua, Hikvision, Samsung, Tiandi Albert, Keda, Honeywell, Aipu Wharton, Funiteda, Funitech, Forvision, WEISKY, etc. For hikvision camera pressing just one key to activate, Image test, can modify the user name, password, encoding format, IP address, and channel name. Support batch activation, modify video settings, IP address, restore factory settings, reset password, etc. For Dahua camera batch activation and image testing, user name, password, IP and channel name can be modified. Find the camera’s IP address in the all network segment. IP scan, Trace route, Link monitor, Link statistics, DHCP server, Port flashing, Ping test, LLDP etc. TVI 5.0 camera test, max 4K 8MP 3840x2160p 12.5/15fps, UTC control/call OSD menu. CVI 4.0 camera test, max 4K 8MP 3840x2160p 12.5/15fps, UTC control/call OSD menu. AHD 4.0 camera test, max 4K 8MP 3840x2160p 15fps, UTC control/call OSD menu. EX-SDI, HD-SDI, 3G-SDI camera test, max 4K 8MP 3840x2160p 25/30fps, UTC control & call OSD menu. 1 channel HDMI input, support max 4K 3840x2160P 30fps. 4K 3840×2160P 24/25/30fps, 2K 2560×1440P 60fps, 1920×1080P 24/25/30/50/59/60fps, 1920×1080i 50/58/60fps, 1280×720P 25/30/50/59/60fps, 720×480P 60fps, 720×576P 60fps, 1024×768P 60fps, 1280×1024P 60fps, 1600×1200P 60fps, 1440×900P 60fps, 800×600P 60fps. 1 channel HDMI output, support max 4K 3840x2160P 60fps. 4K 3840×2160P 60/50/30/25/24fps, 4096×2160P 24fps, 1920×1080P 60/50/24fps, 1920×1080i 60/50fps, 1280×720P 60/50fps, 720×576P 50fps, 640x480P 60fps. 1 channel VGA input, support max 1280x1024P 60fps. 4x zoom, to enlarge image, Screen snapshot, record, save, view and record and play back. USB 5V/2A power output, as a power bank. DC12V/3A power out, supply temporarily power for the camera. DC24V/2A power out, supply temporarily power for the speed dome camera. IEEE802.3af/at 48V PoE power output, max power 30W. Search BNC cable, network cable and telephone cable from the mess cables. AC Voltage Detector, Voltage range: AC12V-1000V, Frequency: 50/60Hz, Alarm mode: sound and light double alarm, Safety class: CAT. III 1000V / CAT. Test UTP cable connection status and display on the screen. Read the number on the screen. RJ45 cable TDR test. Test cable pair status, length, attenuation, reflectivity, impedance, skew etc, measurement range 180M. BNC cable, network cable, telephone cable, RVV cable and elevator cable, cat 5/6 cable’s length and short circuit. Measurement range 1.2KM(3937fts). Optical power meter (OPM). Detector type: InGaAs; Calibration wavelength: 1625, 1550, 1490, 1310, 1300, 850nm; Power measurement range (dBm): -70 to +10; Measurement accuracy. ; Display resolution: Linear display 0.1%, logarithmic display 0.01dBm; Connector: Active FC/PC. Visual fault locator (VFL). Analog video level meter, peak video signal level, SYNC signal level. Captures and display the command data from RS485 controlling device, also possible to send hex codes. Built-in WIFI, 2.4GHz, speed 150Mbps, display wireless camera image. Support view wifi information, test wifi strength, analyze channel occupancy and channel level, etc. 1 channel audio signal input, test whether sound normal, 1 channel audio signal, to connect headphone. Measurement POE switch or PSE power supply voltage and cable connection status. Support screenshots and video recordings on the test screen, support photo browsing and video playback operations. The dropdowns menu can quickly turn on the PoE power, IP settings, flashlight, HDMI input, Network info etc. Built-in TF card slot, include a 8GB TF card. Built-in 7.4V Lithium polymer battery, 7800mAh, 57.72Wh. After charging 4 hours, normal working time 11 hours. OSD menu support language: English, Polish, Italian, Korean, Russian, Spanish, Japanese, French, German, Turkish, Portuguese, Serbian, Czech, Vietnamese, etc. 203x140x47mm(8×5.5×1.85inch) /.

Posted on April 23, 2025 rsrteng

Rsrteng 7in 8K CCTV Camera Tester IP CVI TVI SDI AHD HDMI VGA CVBS Cable Tracer

Rsrteng 7in 8K CCTV Camera Tester IP CVI TVI SDI AHD HDMI VGA CVBS Cable Tracer. This item is about IPC-7600CADHS Plus!! It Includes Digital cable tracer. Don’t support Optical power meter, Visual fault locator, TDR cable test!! 7 inch IPS touch screen, 1280800 resolution. 1 channel BNC input, NTSC/PAL (Auto adapt). Main stream test (hardware decoding). Main stream supports up to 8K 32MP 8160×3616 24fps resolution. Main stream supports up to 4K 12MP 4000×3000/3840×2160 30fps resolution. Network & IP camera test. DC12V/POE 48V power supply and power detection, network information, IP address search, image display etc. For Onvif camera, auto log in to view video, modify IP, modify channel names, support face recognition and create test reports. Support more than 80 brands proprietary Protocol Camera such as AXIS, ACTi, Dahua, Hikvision, Samsung, Tiandi Albert, Keda, Honeywell, Aipu Wharton, Funiteda, Funitech, Forvision, WEISKY, etc. For hikvision camera pressing just one key to activate, Image test, can modify the user name, password, encoding format, IP address, and channel name. Support batch activation, modify video settings, IP address, restore factory settings, reset password, etc. For Dahua camera batch activation and image testing, user name, password, IP and channel name can be modified. Find the camera’s IP address in the all network segment. IP scan, Trace route, Link monitor, Link statistics, DHCP server, Port flashing, Ping test, LLDP etc. TVI 5.0 camera test, max 4K 8MP 3840x2160p 12.5/15fps, UTC control/call OSD menu. CVI 4.0 camera test, max 4K 8MP 3840x2160p 12.5/15fps, UTC control/call OSD menu. AHD 4.0 camera test, max 4K 8MP 3840x2160p 15fps, UTC control/call OSD menu. EX-SDI, HD-SDI, 3G-SDI camera test, max 4K 8MP 3840x2160p 25/30fps, UTC control & call OSD menu. 1 channel HDMI input, support max 4K 3840x2160P 30fps. 4K 3840×2160P 24/25/30fps, 2K 2560×1440P 60fps, 1920×1080P 24/25/30/50/59/60fps, 1920×1080i 50/58/60fps, 1280×720P 25/30/50/59/60fps, 720×480P 60fps, 720×576P 60fps, 1024×768P 60fps, 1280×1024P 60fps, 1600×1200P 60fps, 1440×900P 60fps, 800×600P 60fps. 1 channel HDMI output, support max 4K 3840x2160P 60fps. 4K 3840×2160P 60/50/30/25/24fps, 4096×2160P 24fps, 1920×1080P 60/50/24fps, 1920×1080i 60/50fps, 1280×720P 60/50fps, 720×576P 50fps, 640x480P 60fps. 1 channel VGA input, support max 1280x1024P 60fps. 4x zoom, to enlarge image, Screen snapshot, record, save, view and record and play back. USB 5V/2A power output, as a power bank. DC12V/3A power out, supply temporarily power for the camera. DC24V/2A power out, supply temporarily power for the speed dome camera. IEEE802.3af/at 48V PoE power output, max power 30W. Search BNC cable, network cable and telephone cable from the mess cables. AC Voltage Detector, Voltage range: AC12V-1000V, Frequency: 50/60Hz, Alarm mode: sound and light double alarm, Safety class: CAT. III 1000V / CAT. Test UTP cable connection status and display on the screen. Read the number on the screen. RJ45 cable TDR test. Test cable pair status, length, attenuation, reflectivity, impedance, skew etc, measurement range 180M. Optical power meter (OPM). Visual fault locator (VFL). Captures and display the command data from RS485 controlling device, also possible to send hex codes. Built-in WIFI, 2.4GHz, speed 150Mbps, display wireless camera image. Support view wifi information, test wifi strength, analyze channel occupancy and channel level, etc. 1 channel audio signal input, test whether sound normal, 1 channel audio signal, to connect headphone. Measurement POE switch or PSE power supply voltage and cable connection status. Support screenshots and video recordings on the test screen, support photo browsing and video playback operations. The dropdowns menu can quickly turn on the PoE power, IP settings, flashlight, HDMI input, Network info etc. Built-in TF card slot, include a 8GB TF card. Built-in 7.4V Lithium polymer battery, 7800mAh, 57.72Wh. After charging 4 hours, normal working time 11 hours. OSD menu support language: English, Polish, Italian, Korean, Russian, Spanish, Japanese, French, German, Turkish, Portuguese, Serbian, Czech, Vietnamese, etc. 203x140x47mm(8×5.5×1.85inch) / 935g(2.06lbs).

Posted on April 22, 2025 rsrteng

Rsrteng 7inch CCTV Tester 4K AHD CVI TVI SDI Camera Monitor VGA HDMI TDR OPM POE

Thank you for visiting our store, your satisfaction is our pursuit! This item is about. Testers: IPC-7600C Plus, IPC-7600CADH Plus, IPC-7600CADHS Plus, IPC-7600COTADHS Plus, IPC-7600COVTADHS Plus. 7 inch IPS touch screen, 1280800 resolution. 1 channel BNC input, NTSC/PAL (Auto adapt). Main stream test (hardware decoding). Main stream supports up to 8K 32MP 8160×3616 24fps resolution. Main stream supports up to 4K 12MP 4000×3000/3840×2160 30fps resolution. Network & IP camera test. DC12V/POE 48V power supply and power detection, network information, IP address search, image display etc. For Onvif camera, auto log in to view video, modify IP, modify channel names, support face recognition and create test reports. Support more than 80 brands proprietary Protocol Camera such as AXIS, ACTi, Dahua, Hikvision, Samsung, Tiandi Albert, Keda, Honeywell, Aipu Wharton, Funiteda, Funitech, Forvision, WEISKY, etc. For hikvision camera pressing just one key to activate, Image test, can modify the user name, password, encoding format, IP address, and channel name. Support batch activation, modify video settings, IP address, restore factory settings, reset password, etc. For Dahua camera batch activation and image testing, user name, password, IP and channel name can be modified. Find the camera’s IP address in the all network segment. IP scan, Trace route, Link monitor, Link statistics, DHCP server, Port flashing, Ping test, LLDP etc. TVI 5.0 camera test, max 4K 8MP 3840x2160p 12.5/15fps, UTC control/call OSD menu. CVI 4.0 camera test, max 4K 8MP 3840x2160p 12.5/15fps, UTC control/call OSD menu. AHD 4.0 camera test, max 4K 8MP 3840x2160p 15fps, UTC control/call OSD menu. EX-SDI, HD-SDI, 3G-SDI camera test, max 4K 8MP 3840x2160p 25/30fps, UTC control & call OSD menu. 1 channel HDMI input, support max 4K 3840x2160P 30fps. 4K 3840×2160P 24/25/30fps, 2K 2560×1440P 60fps, 1920×1080P 24/25/30/50/59/60fps, 1920×1080i 50/58/60fps, 1280×720P 25/30/50/59/60fps, 720×480P 60fps, 720×576P 60fps, 1024×768P 60fps, 1280×1024P 60fps, 1600×1200P 60fps, 1440×900P 60fps, 800×600P 60fps. 1 channel HDMI output, support max 4K 3840x2160P 60fps. 4K 3840×2160P 60/50/30/25/24fps, 4096×2160P 24fps, 1920×1080P 60/50/24fps, 1920×1080i 60/50fps, 1280×720P 60/50fps, 720×576P 50fps, 640x480P 60fps. 1 channel VGA input, support max 1280x1024P 60fps. 4x zoom, to enlarge image, Screen snapshot, record, save, view and record and play back. USB 5V/2A power output, as a power bank. DC12V/3A power out, supply temporarily power for the camera. DC24V/2A power out, supply temporarily power for the speed dome camera. IEEE802.3af/at 48V PoE power output, max power 30W. Search BNC cable, network cable and telephone cable from the mess cables. AC Voltage Detector, Voltage range: AC12V-1000V, Frequency: 50/60Hz, Alarm mode: sound and light double alarm, Safety class: CAT. III 1000V / CAT. Test UTP cable connection status and display on the screen. Read the number on the screen. RJ45 cable TDR test. Test cable pair status, length, attenuation, reflectivity, impedance, skew etc, measurement range 180M. BNC cable, network cable, telephone cable, RVV cable and elevator cable, cat 5/6 cable’s length and short circuit. Measurement range 1.2KM(3937fts). Optical power meter (OPM). Detector type: InGaAs; Calibration wavelength: 1625, 1550, 1490, 1310, 1300, 850nm; Power measurement range (dBm): -70 to +10; Measurement accuracy. ; Display resolution: Linear display 0.1%, logarithmic display 0.01dBm; Connector: Active FC/PC. Visual fault locator (VFL). Analog video level meter, peak video signal level, SYNC signal level. Captures and display the command data from RS485 controlling device, also possible to send hex codes. Built-in WIFI, 2.4GHz, speed 150Mbps, display wireless camera image. Support view wifi information, test wifi strength, analyze channel occupancy and channel level, etc. 1 channel audio signal input, test whether sound normal, 1 channel audio signal, to connect headphone. Measurement POE switch or PSE power supply voltage and cable connection status. Support screenshots and video recordings on the test screen, support photo browsing and video playback operations. The dropdowns menu can quickly turn on the PoE power, IP settings, flashlight, HDMI input, Network info etc. Built-in TF card slot, include a 8GB TF card. Built-in 7.4V Lithium polymer battery, 7800mAh, 57.72Wh. After charging 4 hours, normal working time 11 hours. OSD menu support language: English, Polish, Italian, Korean, Russian, Spanish, Japanese, French, German, Turkish, Portuguese, Serbian, Czech, Vietnamese, etc. 203x140x47mm(8×5.5×1.85inch) /.

Posted on April 22, 2025 rsrteng

Rsrteng IPC-7600CADH Plus 7 IP CCTV Camera Tester HD CVI TVI AHD VGA HDMI USA

Rsrteng IPC-7600CADH Plus 7 IP CCTV. Tester HD CVI TVI AHD POE VGA HDMI. This listing we will. 7 inch IPS touch screen, 1280800 resolution. 1 channel BNC input, NTSC/PAL (Auto adapt). Network & IP camera test. DC12V/POE 48V power supply and power detection, network information, IP address search, image display etc. For Onvif camera, auto log in to view video, modify IP, modify channel names, support face recognition and create test reports. Support more than 80 brands proprietary Protocol Camera such as AXIS, ACTi, Dahua, Hikvision, Samsung, Tiandi Albert, Keda, Honeywell, Aipu Wharton, Funiteda, Funitech, Forvision, WEISKY, etc. For hikvision camera pressing just one key to activate, Image test, can modify the user name, password, encoding format, IP address, and channel name. Support batch activation, modify video settings, IP address, restore factory settings, reset password, etc. For Dahua camera batch activation and image testing, user name, password, IP and channel name can be modified. Find the camera’s IP address in the all network segment. IP scan, Trace route, Link monitor, Link statistics, DHCP server, Port flashing, Ping test, LLDP etc. TVI 5.0 camera test, max 4K 8MP 3840x2160p 12.5/15fps, UTC control/call OSD menu. CVI 4.0 camera test, max 4K 8MP 3840x2160p 12.5/15fps, UTC control/call OSD menu. AHD 4.0 camera test, max 4K 8MP 3840x2160p 15fps, UTC control/call OSD menu. T support SDI camera test. 1 channel HDMI input, support max 4K 3840x2160P 30fps. 4K 3840×2160P 24/25/30fps, 2K 2560×1440P 60fps, 1920×1080P 24/25/30/50/59/60fps, 1920×1080i 50/58/60fps, 1280×720P 25/30/50/59/60fps, 720×480P 60fps, 720×576P 60fps, 1024×768P 60fps, 1280×1024P 60fps, 1600×1200P 60fps, 1440×900P 60fps, 800×600P 60fps. 1 channel HDMI output, support max 4K 3840x2160P 60fps. 4K 3840×2160P 60/50/30/25/24fps, 4096×2160P 24fps, 1920×1080P 60/50/24fps, 1920×1080i 60/50fps, 1280×720P 60/50fps, 720×576P 50fps, 640x480P 60fps. 1 channel VGA input, support max 1280x1024P 60fps. 4x zoom, to enlarge image, Screen snapshot, record, save, view and record and play back. USB 5V/2A power output, as a power bank. DC12V/3A power out, supply temporarily power for the camera. DC24V/2A power out, supply temporarily power for the speed dome camera. IEEE802.3af/at 48V PoE power output, max power 30W. Search BNC cable, network cable and telephone cable from the mess cables. AC Voltage Detector, Voltage range: AC12V-1000V, Frequency: 50/60Hz, Alarm mode: sound and light double alarm, Safety class: CAT. III 1000V / CAT. Test UTP cable connection status and display on the screen. Read the number on the screen. RJ45 cable TDR test. Test cable pair status, length, attenuation, reflectivity, impedance, skew etc, measurement range 180M. Optical power meter (OPM). Visual fault locator (VFL). Captures and display the command data from RS485 controlling device, also possible to send hex codes. Built-in WIFI, 2.4GHz, speed 150Mbps, display wireless camera image. Support view wifi information, test wifi strength, analyze channel occupancy and channel level, etc. 1 channel audio signal input, test whether sound normal, 1 channel audio signal, to connect headphone. Measurement POE switch or PSE power supply voltage and cable connection status. Support screenshots and video recordings on the test screen, support photo browsing and video playback operations. The dropdowns menu can quickly turn on the PoE power, IP settings, flashlight, HDMI input, Network info etc. Built-in TF card slot, include a 8GB TF card. Built-in 7.4V Lithium polymer battery, 7800mAh, 57.72Wh. After charging 4 hours, normal working time 11 hours. OSD menu support language: English, Polish, Italian, Korean, Russian, Spanish, Japanese, French, German, Turkish, Portuguese, Serbian, Czech, Vietnamese, etc. 203x140x47mm(8×5.5×1.85inch) /.

Posted on April 21, 2025 rsrteng

Rsrteng 8K 7 Camera Tester AHD CVI TVI SDI TDR OPM VLS IPC-7600COVTADHS Plus US

7 inch IPS touch screen, 1280800 resolution. 1 channel BNC input, NTSC/PAL (Auto adapt). Main stream test (hardware decoding). Network & IP camera test. DC12V/POE 48V power supply and power detection, network information, IP address search, image display etc. For Onvif camera, auto log in to view video, modify IP, modify channel names, support face recognition and create test reports. Support more than 80 brands proprietary Protocol Camera such as AXIS, ACTi, Dahua, Hikvision, Samsung, Tiandi Albert, Keda, Honeywell, Aipu Wharton, Funiteda, Funitech, Forvision, WEISKY, etc. For hikvision camera pressing just one key to activate, Image test, can modify the user name, password, encoding format, IP address, and channel name. Support batch activation, modify video settings, IP address, restore factory settings, reset password, etc. For Dahua camera batch activation and image testing, user name, password, IP and channel name can be modified. Find the camera’s IP address in the all network segment. IP scan, Trace route, Link monitor, Link statistics, DHCP server, Port flashing, Ping test, LLDP etc. TVI 5.0 camera test, max 4K 8MP 3840x2160p 12.5/15fps, UTC control/call OSD menu. CVI 4.0 camera test, max 4K 8MP 3840x2160p 12.5/15fps, UTC control/call OSD menu. AHD 4.0 camera test, max 4K 8MP 3840x2160p 15fps, UTC control/call OSD menu. EX-SDI, HD-SDI, 3G-SDI camera test, max 4K 8MP 3840x2160p 25/30fps, UTC control & call OSD menu. 1 channel HDMI input, support max 4K 3840x2160P 30fps. 4K 3840×2160P 24/25/30fps, 2K 2560×1440P 60fps, 1920×1080P 24/25/30/50/59/60fps, 1920×1080i 50/58/60fps, 1280×720P 25/30/50/59/60fps, 720×480P 60fps, 720×576P 60fps, 1024×768P 60fps, 1280×1024P 60fps, 1600×1200P 60fps, 1440×900P 60fps, 800×600P 60fps. 1 channel HDMI output, support max 4K 3840x2160P 60fps. 4K 3840×2160P 60/50/30/25/24fps, 4096×2160P 24fps, 1920×1080P 60/50/24fps, 1920×1080i 60/50fps, 1280×720P 60/50fps, 720×576P 50fps, 640x480P 60fps. 1 channel VGA input, support max 1280x1024P 60fps. 4x zoom, to enlarge image, Screen snapshot, record, save, view and record and play back. USB 5V/2A power output, as a power bank. DC12V/3A power out, supply temporarily power for the camera. DC24V/2A power out, supply temporarily power for the speed dome camera. IEEE802.3af/at 48V PoE power output, max power 30W. Search BNC cable, network cable and telephone cable from the mess cables. AC Voltage Detector, Voltage range: AC12V-1000V, Frequency: 50/60Hz, Alarm mode: sound and light double alarm, Safety class: CAT. III 1000V / CAT. Test UTP cable connection status and display on the screen. Read the number on the screen. RJ45 cable TDR test. Test cable pair status, length, attenuation, reflectivity, impedance, skew etc, measurement range 180M. BNC cable, network cable, telephone cable, RVV cable and elevator cable, cat 5/6 cable’s length and short circuit. Measurement range 1.2KM(3937fts). Optical power meter (OPM). Detector type: InGaAs; Calibration wavelength: 1625, 1550, 1490, 1310, 1300, 850nm; Power measurement range (dBm): -70 to +10; Measurement accuracy. ; Display resolution: Linear display 0.1%, logarithmic display 0.01dBm; Connector: Active FC/PC. Visual fault locator (VFL). Laser type: LD; Calibration wavelength: 650nm; Output power: 10mW; Modulation mode: CW/1Hz/2Hz; Measuring range 8000 meter; Connector: Active FC/PC; Working temperature: -10. Analog video level meter, peak video signal level, SYNC signal level. Captures and display the command data from RS485 controlling device, also possible to send hex codes. Built-in WIFI, 2.4GHz, speed 150Mbps, display wireless camera image. Support view wifi information, test wifi strength, analyze channel occupancy and channel level, etc. 1 channel audio signal input, test whether sound normal, 1 channel audio signal, to connect headphone. Measurement POE switch or PSE power supply voltage and cable connection status. Support screenshots and video recordings on the test screen, support photo browsing and video playback operations. The dropdowns menu can quickly turn on the PoE power, IP settings, flashlight, HDMI input, Network info etc. Built-in TF card slot, include a 8GB TF card. Built-in 7.4V Lithium polymer battery, 7800mAh, 57.72Wh. After charging 4 hours, normal working time 11 hours. OSD menu support language: English, Polish, Italian, Korean, Russian, Spanish, Japanese, French, German, Turkish, Portuguese, Serbian, Czech, Vietnamese, etc. 203x140x47mm(8×5.5×1.85inch) /.

Posted on April 21, 2025 rsrteng

Rsrteng 7inch 8K IP Camera Monitor CCTV Tester CVI TVI SDI AHD HDMI VGA POE WIFI

This item is about IPC-7600ADHS Plus!!! It doesn’t Include Digital cable tracer. Don’t support Optical power meter, Visual fault locator, TDR cable test!! 7 inch IPS touch screen, 1280800 resolution. 1 channel BNC input, NTSC/PAL (Auto adapt). Main stream test (hardware decoding). Main stream supports up to 8K 32MP 8160×3616 24fps resolution. Main stream supports up to 4K 12MP 4000×3000/3840×2160 30fps resolution. Network & IP camera test. DC12V/POE 48V power supply and power detection, network information, IP address search, image display etc. For Onvif camera, auto log in to view video, modify IP, modify channel names, support face recognition and create test reports. Support more than 80 brands proprietary Protocol Camera such as AXIS, ACTi, Dahua, Hikvision, Samsung, Tiandi Albert, Keda, Honeywell, Aipu Wharton, Funiteda, Funitech, Forvision, WEISKY, etc. For hikvision camera pressing just one key to activate, Image test, can modify the user name, password, encoding format, IP address, and channel name. Support batch activation, modify video settings, IP address, restore factory settings, reset password, etc. For Dahua camera batch activation and image testing, user name, password, IP and channel name can be modified. Find the camera’s IP address in the all network segment. IP scan, Trace route, Link monitor, Link statistics, DHCP server, Port flashing, Ping test, LLDP etc. TVI 5.0 camera test, max 4K 8MP 3840x2160p 12.5/15fps, UTC control/call OSD menu. CVI 4.0 camera test, max 4K 8MP 3840x2160p 12.5/15fps, UTC control/call OSD menu. AHD 4.0 camera test, max 4K 8MP 3840x2160p 15fps, UTC control/call OSD menu. EX-SDI, HD-SDI, 3G-SDI camera test, max 4K 8MP 3840x2160p 25/30fps, UTC control & call OSD menu. 1 channel HDMI input, support max 4K 3840x2160P 30fps. 4K 3840×2160P 24/25/30fps, 2K 2560×1440P 60fps, 1920×1080P 24/25/30/50/59/60fps, 1920×1080i 50/58/60fps, 1280×720P 25/30/50/59/60fps, 720×480P 60fps, 720×576P 60fps, 1024×768P 60fps, 1280×1024P 60fps, 1600×1200P 60fps, 1440×900P 60fps, 800×600P 60fps. 1 channel HDMI output, support max 4K 3840x2160P 60fps. 4K 3840×2160P 60/50/30/25/24fps, 4096×2160P 24fps, 1920×1080P 60/50/24fps, 1920×1080i 60/50fps, 1280×720P 60/50fps, 720×576P 50fps, 640x480P 60fps. 1 channel VGA input, support max 1280x1024P 60fps. 4x zoom, to enlarge image, Screen snapshot, record, save, view and record and play back. USB 5V/2A power output, as a power bank. DC12V/3A power out, supply temporarily power for the camera. DC24V/2A power out, supply temporarily power for the speed dome camera. IEEE802.3af/at 48V PoE power output, max power 30W. Search BNC cable, network. And telephone cable from the mess cables. AC Voltage Detector, Voltage range: AC12V-1000V, Frequency: 50/60Hz, Alarm mode: sound and light double alarm, Safety class: CAT. III 1000V / CAT. Test UTP cable connection status and display on the screen. Read the number on the screen. RJ45 cable TDR test. Test cable pair status, length, attenuation, reflectivity, impedance, skew etc, measurement range 180M. Optical power meter (OPM). Visual fault locator (VFL). Captures and display the command data from RS485 controlling device, also possible to send hex codes. Built-in WIFI, 2.4GHz, speed 150Mbps, display wireless camera image. Support view wifi information, test wifi strength, analyze channel occupancy and channel level, etc. 1 channel audio signal input, test whether sound normal, 1 channel audio signal, to connect headphone. Measurement POE switch or PSE power supply voltage and cable connection status. Support screenshots and video recordings on the test screen, support photo browsing and video playback operations. The dropdowns menu can quickly turn on the PoE power, IP settings, flashlight, HDMI input, Network info etc. Built-in TF card slot, include a 8GB TF card. Built-in 7.4V Lithium polymer battery, 7800mAh, 57.72Wh. After charging 4 hours, normal working time 11 hours. OSD menu support language: English, Polish, Italian, Korean, Russian, Spanish, Japanese, French, German, Turkish, Portuguese, Serbian, Czech, Vietnamese, etc. 203x140x47mm(8×5.5×1.85inch) / 935g(2.06lbs).

Posted on April 20, 2025 hikvision

Hikvision 5mp Security System 4k Cctv 16ch Hd Bullet Camera Home Security Kit

IDS-7216HUHI-M2/S 8MP16-ch 5 MP 1U H. Deep learning-based motion detection 2.0 for all analog channels. Deep learning-based perimeter protection. 265 pro+ compression technology. 5 signals input adaptively (HDTVI/AHD/CVI/CVBS/IP). Up to 32 network cameras can be connected. Motion Detection 2.0. Deep learning-based motion detection 2.0 is enabled by default for all analog channels. It can classify human and vehicle, and extremely reduce false alarms caused by objects. Like leaves and lights. Quick search by object or event type is supported. 32 Kbps to 10 Mbps. Video, Video & Audio. 8-ch (up to 24-ch). Enhanced IP mode on: 16-ch (up to 32-ch), each up to 4 Mbps. Up to 8 MP resolution. BNC interface (1.0 Vp-p, 75?), supporting coaxitron connection. 1-ch, 4K (3840 × 2160)/30Hz. 2K (2560 × 1440)/60Hz. 1-ch, 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz. 1-ch, BNC (1.0 Vp-p, 75?). Resolution: PAL: 704 × 576, NTSC: 704 × 480. 1-ch, RCA (Linear, 1 K?). 1-ch (up to 16-ch is optional), RCA (2.0 Vpp, 1 K?). 16-ch via coaxial cable. 1-ch, RCA (2.0 Vp-p, 1 K?) (using the audio input). TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnPT, HTTPS, ONVIF. 1, RJ45 10/100/1000 Mbps self-adaptive Ethernet interface. Wi-Fi Connectable to Wi-Fi network by Wi-Fi dongle through USB interface. Up to 10 TB capacity for each disk. Front panel: 1 × USB 2.0. Rear panel: 1 × USB 3.0. N/A (optional to support). 12 VDC, 5 A. 10 °C to +55 °C (+14 °F to +131 °F). Dimension (W × D × H). 380 × 320 × 48 mm (15.0 × 12.6 × 1.9 inch). 2.1 kg (4.6 lb). DS-2CE17H0T-IT3F 5 MP Fixed Bullet Camera. High quality imaging with 5 MP, 2560 × 1944 resolution. 2.8 mm, 3.6 mm, 6 mm, 8mm, 12mm fixed focal lens. Up to 40 m IR distance for bright night imaging. One port for four switchable signals (TVI/AHD/CVI/CVBS). Water and dust resistant (IP67). 2560 (H) × 1944 (V). PAL: 1/25 s to 1/50, 000 s. NTSC: 1/30 s to 1/50, 000 s. Pan: 0 to 360°, Tilt: 0 to 180°, Rotation 0 to 360°. 2.8 mm, 3.6 mm, 6 mm, 8 mm, 12 mm fixed lens. Focal Length & FOV. 2.8 mm, horizontal FOV: 85°, vertical FOV: 63°, diagonal FOV:110°. 3.6 mm, horizontal FOV: 80°, vertical FOV: 63°, diagonal FOV:105°. 6 mm, horizontal FOV: 57°, vertical FOV: 43°, diagonal FOV:72°. 8 mm, horizontal FOV: 41°, vertical FOV: 31°, diagonal FOV:52°. 12 mm, horizontal FOV: 26°, vertical FOV: 19°, diagonal FOV:32°. Brightness, Sharpness, Mirror, Smart IR. Auto/Color/BW (Black and White). Wide Dynamic Range (WDR). 78.9 mm × 75.4 mm × 216.6 mm (3.10″ × 2.97″ × 8.53). 330 g 0.73 lb. 40 °C to 60 °C (-40 °F to 140 °F), humidity: 90% or less (non-condensation). 12 VDC ± 25%. Up to 40 m.

Posted on April 20, 2025 wireless

Wireless Video Doorbell Pro (Chime Included), 1440 HD Video, 11 Aspect Ratio

Built for ease of use and installation, Video Doorbell Pro gives you everything you want without everything you don’t. If you don’t like screws, no problem, a 3M adhesive strip is included, just peel and stick to any frame. That’s why we put a massive battery in there that lasts up to 6 months. Never miss anything with an ultrawide, head-to-toe viewing angle of your front porch in fuller-than-HD resolution. What we do offer is Cam Plus that unlocks awesome extra features like Package Detection, Person Detection, and unlimited video cloud storage. See more than ever before, wire free, with Video Doorbell Pro. Hassle-Free: Effortlessly mount Wireless Doorbell Pro for front porch protection in under 30 seconds. Screws and hardwiring equipment, though optional, are included, for even more ways to install. See the whole story – clearly: A 1440×1440 fuller than HD sensor means you’ll see it all with 33% more clarity than traditional HD cameras. Chime Included: Hear your doorbell ring, chirp, or bark. Choose between 20 unique tunes and 8 sound levels to find the perfect chime for you, even scare off potential intruders with a dog bark. Optional upgrade available: upgrade to Cam Plus to receive real-time alerts when people are detected and store full-length videos in the cloud for 14-days.

Posted on April 19, 2025 rsrteng

Rsrteng 7inch 8K CCTV Tester Camera Monitor CVI TVI SDI AHD HDMI VGA POE CVBS US

This item is about IPC-7600CADHS Plus!! It Includes Digital cable tracer. Don’t support Optical power meter, Visual fault locator, TDR cable test!! 7 inch IPS touch screen, 1280800 resolution. 1 channel BNC input, NTSC/PAL (Auto adapt). Main stream test (hardware decoding). Main stream supports up to 8K 32MP 8160×3616 24fps resolution. Main stream supports up to 4K 12MP 4000×3000/3840×2160 30fps resolution. Network & IP camera test. DC12V/POE 48V power supply and power detection, network information, IP address search, image display etc. For Onvif camera, auto log in to view video, modify IP, modify channel names, support face recognition and create test reports. Support more than 80 brands proprietary Protocol Camera such as AXIS, ACTi, Dahua, Hikvision, Samsung, Tiandi Albert, Keda, Honeywell, Aipu Wharton, Funiteda, Funitech, Forvision, WEISKY, etc. For hikvision camera pressing just one key to activate, Image test, can modify the user name, password, encoding format, IP address, and channel name. Support batch activation, modify video settings, IP address, restore factory settings, reset password, etc. For Dahua camera batch activation and image testing, user name, password, IP and channel name can be modified. Find the camera’s IP address in the all network segment. IP scan, Trace route, Link monitor, Link statistics, DHCP server, Port flashing, Ping test, LLDP etc. TVI 5.0 camera test, max 4K 8MP 3840x2160p 12.5/15fps, UTC control/call OSD menu. CVI 4.0 camera test, max 4K 8MP 3840x2160p 12.5/15fps, UTC control/call OSD menu. AHD 4.0 camera test, max 4K 8MP 3840x2160p 15fps, UTC control/call OSD menu. EX-SDI, HD-SDI, 3G-SDI camera test, max 4K 8MP 3840x2160p 25/30fps, UTC control & call OSD menu. 1 channel HDMI input, support max 4K 3840x2160P 30fps. 4K 3840×2160P 24/25/30fps, 2K 2560×1440P 60fps, 1920×1080P 24/25/30/50/59/60fps, 1920×1080i 50/58/60fps, 1280×720P 25/30/50/59/60fps, 720×480P 60fps, 720×576P 60fps, 1024×768P 60fps, 1280×1024P 60fps, 1600×1200P 60fps, 1440×900P 60fps, 800×600P 60fps. 1 channel HDMI output, support max 4K 3840x2160P 60fps. 4K 3840×2160P 60/50/30/25/24fps, 4096×2160P 24fps, 1920×1080P 60/50/24fps, 1920×1080i 60/50fps, 1280×720P 60/50fps, 720×576P 50fps, 640x480P 60fps. 1 channel VGA input, support max 1280x1024P 60fps. 4x zoom, to enlarge image, Screen snapshot, record, save, view and record and play back. USB 5V/2A power output, as a power bank. DC12V/3A power out, supply temporarily power for the camera. DC24V/2A power out, supply temporarily power for the speed dome camera. IEEE802.3af/at 48V PoE power output, max power 30W. Search BNC cable, network cable and telephone cable from the mess cables. AC Voltage Detector, Voltage range: AC12V-1000V, Frequency: 50/60Hz, Alarm mode: sound and light double alarm, Safety class: CAT. III 1000V / CAT. Test UTP cable connection status and display on the screen. Read the number on the screen. RJ45 cable TDR test. Test cable pair status, length, attenuation, reflectivity, impedance, skew etc, measurement range 180M. Optical power meter (OPM). Visual fault locator (VFL). Captures and display the command data from RS485 controlling device, also possible to send hex codes. Built-in WIFI, 2.4GHz, speed 150Mbps, display wireless camera image. Support view wifi information, test wifi strength, analyze channel occupancy and channel level, etc. 1 channel audio signal input, test whether sound normal, 1 channel audio signal, to connect headphone. Measurement POE switch or PSE power supply voltage and cable connection status. Support screenshots and video recordings on the test screen, support photo browsing and video playback operations. The dropdowns menu can quickly turn on the PoE power, IP settings, flashlight, HDMI input, Network info etc. Built-in TF card slot, include a 8GB TF card. Built-in 7.4V Lithium polymer battery, 7800mAh, 57.72Wh. After charging 4 hours, normal working time 11 hours. OSD menu support language: English, Polish, Italian, Korean, Russian, Spanish, Japanese, French, German, Turkish, Portuguese, Serbian, Czech, Vietnamese, etc. 203x140x47mm(8×5.5×1.85inch) / 935g(2.06lbs).

Adt Home Security