4 Honeywell Ademco ADT 5819WHS Wireless Door / Shock Sensor Alarm System Contact

4 Honeywell Ademco ADT 5819WHS Wireless Door / Shock Sensor Alarm System Contact
4 Honeywell Ademco ADT 5819WHS Wireless Door / Shock Sensor Alarm System Contact
4 Honeywell Ademco ADT 5819WHS Wireless Door / Shock Sensor Alarm System Contact
4 Honeywell Ademco ADT 5819WHS Wireless Door / Shock Sensor Alarm System Contact
4 Honeywell Ademco ADT 5819WHS Wireless Door / Shock Sensor Alarm System Contact
4 Honeywell Ademco ADT 5819WHS Wireless Door / Shock Sensor Alarm System Contact
4 Honeywell Ademco ADT 5819WHS Wireless Door / Shock Sensor Alarm System Contact
4 Honeywell Ademco ADT 5819WHS Wireless Door / Shock Sensor Alarm System Contact
4 Honeywell Ademco ADT 5819WHS Wireless Door / Shock Sensor Alarm System Contact
4 Honeywell Ademco ADT 5819WHS Wireless Door / Shock Sensor Alarm System Contact
4 Honeywell Ademco ADT 5819WHS Wireless Door / Shock Sensor Alarm System Contact
4 Honeywell Ademco ADT 5819WHS Wireless Door / Shock Sensor Alarm System Contact

4 Honeywell Ademco ADT 5819WHS Wireless Door / Shock Sensor Alarm System Contact
The Honeywell 5819WHS is a wireless shock processor and transmitter with integrated shock sensor. Unlike the Honeywell 5819, this device includes the shock sensor needed to protect a pane of glass or other surface from intrusion. The integrated shock sensor will provide a typical area of coverage of 10-12′ with a 5-6′ radius. The type of glass or surface being protected can affect the coverage area but normally you would only need (1) 5819WHS per pane of glass. The 5819WHS wireless transmitter also has (2) auxiliary loops beyond the first built-in shock sensor loop (loop 1). The second loop utilizes the built-in magnetic reed switch along with a magnet (not included) to protect any opening from intrusion. The third loop is designed for an external wired, normally closed contact loop which you must connect to the 5819 transmitter’s TB2 terminals. Each loop must be programmed as a separate unique wireless zone within your wireless alarm system’s zone programming. When mounting the Honeywell 5819WHS, make sure that the embossed arrow on the shock sensor is pointing up when the 5819WHS is mounted. If you will use the transmitter’s reed switch and need to mount the sensor in a way that the arrow is not pointing up, you can gently push the shock sensor away from the mounting hole to twist it so that the arrow points up once the shock sensor is reinstalled and the wireless transmitter is mounted. The 5819WHS wireless shock sensor and transmitter has selectable response time and sensitivity levels. You can set the response time using the internal dip switches. If all dip switches are set to the off position, the alarm response time will be 0.5mSec. If the SW1 switch is set to on, the alarm response time will be 1mSec. If SW2 switch is on, the alarm response time will be 2mSec. If SW3 switch is on, the alarm response time will be 5mSec. If SW4 switch is on, the alarm response time will be 10mSec. Finally, if the SW5 switch is on, the alarm response time will be 20mSec. You can also use the jumper pins to select the sensitivity level of the shock sensor. Jumper 1 uses a pulse count of (1) which is the most sensitive. Jumper 5 uses a pulse count of (8) which is the least sensitive. You should test the shock sensor with different dip switch and jumper settings until the 5819WHS does not trigger false alarms under normal conditions. The item “4 Honeywell Ademco ADT 5819WHS Wireless Door / Shock Sensor Alarm System Contact” is in sale since Saturday, July 22, 2017. This item is in the category “Home & Garden\Home Improvement\Home Security\Wireless Transmitters”. The seller is “ibuyalarmsupply” and is located in Lowell, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras.
  • Brand: Honeywell
  • MPN: 5819WHS
  • Model: Wireless Shock Sensor and Transmitter
  • Country/Region of Manufacture: Mexico

4 Honeywell Ademco ADT 5819WHS Wireless Door / Shock Sensor Alarm System Contact

4 Honeywell Ademco ADT 5800CO Wireless Carbon Monoxide CO Detector Replace 2021

4 Honeywell Ademco ADT 5800CO Wireless Carbon Monoxide CO Detector Replace 2021
4 Honeywell Ademco ADT 5800CO Wireless Carbon Monoxide CO Detector Replace 2021
4 Honeywell Ademco ADT 5800CO Wireless Carbon Monoxide CO Detector Replace 2021
4 Honeywell Ademco ADT 5800CO Wireless Carbon Monoxide CO Detector Replace 2021
4 Honeywell Ademco ADT 5800CO Wireless Carbon Monoxide CO Detector Replace 2021
4 Honeywell Ademco ADT 5800CO Wireless Carbon Monoxide CO Detector Replace 2021
4 Honeywell Ademco ADT 5800CO Wireless Carbon Monoxide CO Detector Replace 2021
4 Honeywell Ademco ADT 5800CO Wireless Carbon Monoxide CO Detector Replace 2021
4 Honeywell Ademco ADT 5800CO Wireless Carbon Monoxide CO Detector Replace 2021
4 Honeywell Ademco ADT 5800CO Wireless Carbon Monoxide CO Detector Replace 2021
4 Honeywell Ademco ADT 5800CO Wireless Carbon Monoxide CO Detector Replace 2021
4 Honeywell Ademco ADT 5800CO Wireless Carbon Monoxide CO Detector Replace 2021

4 Honeywell Ademco ADT 5800CO Wireless Carbon Monoxide CO Detector Replace 2021
The 5800CO is a 3V battery powered wireless carbon monoxide (CO) detector intended for use with Honeywell alarm systems that support 5800 Series wireless devices. It provides early warning when its electrochemical sensing technology measures carbon monoxide levels in the air. The 5800CO is specifically designed for system operation and is fully listed to UL 2075 as a system supervised detector. It contains a piezoelectric horn which generates the ANSI S3.41 temporal 4 pattern in an alarm condition. The detector consists of an electrochemical carbon monoxide sensor assembly coupled with a wireless transmitter. The transmitter can send alarm, trouble, end-of-life, tamper and low battery condition messages to the alarm panel. Since there are no holes to drill or wires to run, you can preserve the beauty of the home or building while protecting its occupants from harmful carbon monoxide gas. The 5800CO is an ideal carbon monoxide detector for difficult to wire locations, applications where room aesthetics are critical or where hazardous materials exist. What is Carbon Monoxide and How Can it Harm Consumers? Carbon monoxide (CO) is an odorless, colorless, tasteless and highly toxic gas that is produced when fuels such as wood, gasoline, charcoal and oil are burned with insufficient air. The majority of residential and commercial fatalities caused from these fuels come from heating systems, engine powered tools and charcoal grills. Carbon monoxide is harmful when inhaled because it displaces oxygen in the blood and deprives the heart, brain and other vital organs of oxygen. Large amounts of CO can overcome a person in minutes without warningcausing them to lose consciousness and suffocate. The 5800CO is designed to warn the end-user well before the CO reaches a fatal level. The detectors CO sensitivity is evaluated to UL 2034. Electrochemical Sensing Technology – Electrochemical detectors are the newest, most refined CO detectors available and provide the most accurate measurement of CO concentration obtainable. They can take readings from low levels that may be hazardous over long periods of time to high concentrations that present an immediate danger. Local Sounder – A built-in piezoelectric horn generates the ANSI S3.41 temporal 4 pattern in an alarm condition. The local sounder will also alert the end-user of other conditions such as low battery, detector trouble and end-of-life. LED Status Indicators – Dual LEDs provide local visual indication of the detectors statusincluding normal operation, alarm, low battery, trouble and end-of-life. End of Life Timer – When the detector has reached the end of its life, the detector will send a trouble signal to the panel. This indicates that the CO sensor inside the detector has passed the end of its life and the detector needs to be replaced. The detectors lifespan is approximately six years from the date of manufacture. Full Supervision – The 5800CO is fully supervised to monitor for low battery, case tamper and trouble conditions. Test/Hush Button – This dual purpose button allows the end-user to perform periodic testing of the detector. In the event of a CO alarm, this button will silence the local sounder alarm for a five minute period. Note: the Hush feature will not operate at levels above 350 ppm (parts per million) carbon monoxide. Versatile Mounting – Whether you choose to affix the detector to the ceiling or a wall, mounting is made simple with the enclosed hardware. The mounting base has large mounting ports, which accommodate drywall anchors for easy surface mounting. Tamper Protection and Tamper Resistant Element – The detector has a built-in tamper switch that can communicate back to the control panel in the event it is removed from the base. For an added level of security, the detector also includes a tamper resistant element that prevents removal from the base without the use of a tool. The item “4 Honeywell Ademco ADT 5800CO Wireless Carbon Monoxide CO Detector Replace 2021″ is in sale since Wednesday, July 19, 2017. This item is in the category “Home & Garden\Home Improvement\Home Security\Smoke & Gas Detectors\Carbon Monoxide Detectors”. The seller is “ibuyalarmsupply” and is located in Lowell, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Honeywell
  • MPN: 5800CO
  • Model: Wireless Carbon Monoxide Detector
  • Country/Region of Manufacture: Mexico

4 Honeywell Ademco ADT 5800CO Wireless Carbon Monoxide CO Detector Replace 2021