Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt

Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt
Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt
Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt
Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt
Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt
Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt

Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt
Item is new and has been tested, for complete function. All accessories including hardware and software included. This devise allows the use of analog video cameras to be tied into your ADT pulse alarm system. NV412A is the analog to digital converter required if you want to use an analog camera on your ADT Pulse system. If you connect this to the analog camera it makes it viewable on your ADT Pulse login. The NV412A needs to be connected via ethernet to the iHub. Since the iHub only has one devices port, you will need to add the ADT Pulse Switch if you want to have more than one of these connect at a time. There are two scenarios that you would want to use this NV412A. The first is if you have an analog camera system already and just want to be able to view 1-10 of the existing cameras on your new ADT Pulse system. This is easy because all you need is the NV412A. One for each camera. Your cameras are already installed, wired, and powered. So just install the NV412A before the DVR. Unplug the BNC cable from the DVR and plug it into the NV412A and then plug a new BNC cable from the NV412A output to the DVR input. The second scenario is where there is no existing camera and we want to install a new analog camera. This requires you to run the pre-made siamese cable where you want it the camera installed first. Then mount the camera where you want it. After the wire is ran the next step is to connect the wires and then power it up. The coax cable is the video cable that needs to be connected via bnc connector to the NV412A. The power side of the cable needs to be connected to a power supply and then plugged into power. Then your analog camera should be able to be seen from your ADT Pulse portal once you learn in the NV412A. International buyers I choose the best packaging and provide actual packing sizes and weights in all my listings. Thank you for viewing my items. The item “OEM SENSORMATIC NETWORK VIDEO SERVER CONVERTER ADT PULSE NV412AADT NV412A ADT” is in sale since Monday, January 30, 2017. This item is in the category “Home & Garden\Home Improvement\Home Security\Security Systems”. The seller is “cuban_king” and is located in Flushing, New York. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, CL, CO, CR, DO, PA, TT, GT, SV, HN, JM.
  • Brand: Sensormatic
  • Model: NV412A ADT
  • MPN: NV412A
  • Country/Region of Manufacture: China

Oem Sensormatic Network Video Server Converter Adt Pulse Nv412aadt Nv412a Adt